Description
Model: LXGeR-2 Advansys
Hobart Undercounter Glassware Dishwasher
High Temperature, Factory Warranty
New from factory with factory warranty
Hobart LXGeR-2 Advansys Product Details
- Stainless steel construction resists dents and scratches
- Can be installed for freestanding and undercounter-type operations with its front-opening design
- Horizontally mounted, centrifugal-type pump with built-in motor
- Motor has overload protection with auto reset
- Automatic wash and rinse cycle can be interrupted by opening the door, and resumes when the door is closed
- Condenser coil keeps hot water and vapor inside machine to conserve energy
- Built-in booster heater with Sense-A-Temp raises incoming water temperature to 180 degrees F for proper sanitation
- Integral pump automatically drains water
- Choose between light and normal cycles
- Automated delime cycle
- Dirty water indicator and Energy Saver mode
- Auto-clean cycle washes inside of machine at shutdown
- Top-mounted controls with digital cycle and temperature display
- Accommodate rack sizes from 10-in. x 20-in. to 20-in. x 20-in.
- 12-in. door opening height
- Washes 24 racks per hour
- Each cycle runs 146 sec. on a normal setting
- Uses 0.62-gal. of water per rack
- Vent hood is not recommended since it does not produce extreme vapors
- Required incoming water pressure: 15-65 PSI
- Required ambient water temperature: 55 degrees F
Dimensions & Utilities
- 23 15⁄16 in. W x 25 9⁄16 in. D x 34 3⁄8 in. H
- 30.5 A
- 120, 208-240 (3 wire) V/60 Hz/1 ph
Power Type: 120V, 208V / 240V Single Phase
Other On-line Dealers Pricing: $8,816.00
Free Shipping with lift gate service to continental united states businesses – Please be aware the product will ship by freight carrier in a full size tractor trailer and will need room to get in and out or to turn around.
LXGeR-2 Advansys Hobart Undercounter Glassware Dishwasher Information
The Hobart LXGeR-2 glasswasher is made of stainless steel to resist scratches and dents. Its front opening design can be used for freestanding and undercounter-type operations. Its wash and rinse cycle are automatic and can be paused by opening the door, with the cycle resuming when the door is closed. Top-mounted controls have a digital cycle and temperature displays, and the user can choose between a light or normal cycle. With a normal cycle, this glasswasher can wash 24 racks per hour. It only uses 0.62-gallons of water per rack, and each cycle lasts 146 seconds.
The Hobart LXGER-2 glasswasher has a condenser coil that keeps hot water and vapor inside the machine to conserve energy. It has a built-in booster heater with Sense-A-Temp™ that raises the incoming water temperature to 180 degrees Fahrenheit for proper sanitation. Controls include an automated delime cycle, dirty water indicator, and Energy Saver mode, while a vent hood is not recommended since this glasswasher does not produce extreme vapors.
Packaging Equipment
L&D Appliance will package the items you purchase for free. This will be strapping the item to a wooden pallet, installing cardboard or cardboard corners and shrink wrapping the product.
Warranty of Products
All Vulcan and Wolf equipment are purchased as-is-where-is and do not carry the factory warranty. L&D Appliance does offer a 10-day warranty after the product has been installed. The installation needs to be by a professional that can set-up and install the equipment properly. Installation receipt and date will need to be provided for installed equipment for L&D Appliance to honor the 10-day warranty. Parts will be provided by L&D Appliance along with your local tech support for repairs.
Returns
Buyer has 15-days to return an item if they are not satisfied or purchased accidentally, the buyer is responsible for crating and shipping the equipment back to our warehouse in SC. Once the equipment has been inspected, L&D Appliance will process a refund less any damage, missing component cost, initial shipping cost (actual cost of original shipment even on free shipping promotion) and a 15% restock fee.
Delivery Inspection Required
Insure to inspect delivery for any significant damage caused by the freight carriers. If any major damage, please contact Alan 828-527-2241 before driver leaves. If severe damage, refuse delivery. If slight damage, insure driver notes damage before leaving. The is critical, because without documentation the freight company will not accept a claim for the damage and the item delivered will now be the responsibility of the recipient for repairs.
