Description
Model: RHF232WP-FHG
Traulsen 2-Door Warmer with shelves
New scratch and dent, aged inventory – No Damage
Traulsen 2-Door Heated Holding Cabinet with Shelves, Pass Through
Traulsen RHF232WP-FHG 2-Section Hot Food Holding Cabinet Product Details
- Part of the Spec collection
- 20-ga. stainless steel interior and exterior
- 55.8-cu.-ft. capacity
- Full-height doors
- Self-closing with stay-open feature past 120 degrees
- Pass-thru with doors on both sides
- Advanced Smart Control system
- Low/high temp, door open, and power failure alarms
- Temperature range: 140-180 degrees F
- Ducted air circulation
- Power switch on control face
- 6 adjustable shelves
- Magnetic snap-in EZ-Clean gaskets
- 6-in. adjustable legs made of stainless steel
Heated Holding System
- Temperature holding range: 140–180°F
- Low-watt-density serpentine heating element
- Forced-air circulation distributes heat evenly throughout both compartments
- Low-velocity airflow helps prevent food from drying out
- Water-resistant microprocessor temperature control
- 3-digit LED display shows temperature in Fahrenheit or Celsius
- Top-mounted vent provides positive humidity control
- Approximately 2″ thick high-density polyurethane insulation improves heat retention
Dimensions & Utilities
Overall Dimensions:
Width: 58″
Depth: 37 15/16″
Height: 83 1/4″
Interior Dimensions:
Width: 24 7/8″
Depth: 27″
Height: 57 5/8″
Capacity: 55.8 cu. ft.
Electrical Requirements:
- Power Type: 208–230/115V
- Frequency: 60 Hz
- Phase: Single Phase
- Wattage: 3,000 Watts at 208V
- Minimum Circuit Breaker: 20 Amps
- Maximum Overcurrent Protection: 20 Amps
- Electrical Connection: Hardwired, 4-wire connection including ground
Power Type: 208V-230V/120V
Other On-line Dealers Pricing: $30,578.00
Free Shipping with lift gate service to continental united states businesses – Please be aware the product will ship by freight carrier in a full size tractor trailer and will need room to get in and out or to turn around.
Traulsen RHF232WP-HHG Details
Thanks to its high performance ducted fan air distribution system, this Traulsen Specification Line stainless steel RHF232WP-HHG 55.8 cu. ft. two section half door reach-in pass-through heated holding cabinet delivers even heat distribution, quicker daily start-up, lower energy use, and reduced lifetime service costs when compared to a standard model. The pass-through design allows it to be conveniently placed between your kitchen and serving or prep area so your staff can load prepared items from the back and your servers can access them from the front.
The Traulsen RHF232WP-HHG’s stainless steel front and sides combine with high-density foamed-in-place polyurethane insulation to ensure that this heated holding cabinet always delivers consistent temperatures between 135 and 180 degrees Fahrenheit. To monitor the interior cabinet temperature, a Fahrenheit/Celsius temperature display is located on the front of the unit.
Additionally, innovative INTELA-TRAUL microprocessor controls make operation easy with a 3-digit LED display, an on/off button, a one-time start-up temperature adjustment feature, and an RS485 data port all in one convenient location on the front of the unit. For maximum food safety, an alarm alerts your staff of high/low cabinet temperatures, as well as when the door is left open, and when there is a power supply interruption.
For superior versatility, this unit comes complete with six adjustable wire shelves (three per section) to help you make the most of the heated holding cabinet’s spacious stainless steel interior. Eight half height clear glass doors (four per side) provide excellent visibility of the contents inside, while allowing you to open only one small section at a time, helping to preserve internal temperatures.
Overall Dimensions:
Width: 58″
Depth: 37 15/16″
Height: 83 1/4″
Interior Dimensions:
Width: 24 7/8″
Depth: 27″
Height: 57 5/8″
Capacity: 55.8 cu. ft.
Packaging Equipment
L&D Appliance will package the items you purchase for free. This will be strapping the item to a wooden pallet, installing cardboard or cardboard corners and shrink wrapping the product.
Warranty of Products
All Vulcan and Wolf equipment are purchased as-is-where-is and do not carry the factory warranty. L&D Appliance does offer a 10-day warranty after the product has been installed. The installation needs to be by a professional that can set-up and install the equipment properly. Installation receipt and date will need to be provided for installed equipment for L&D Appliance to honor the 10-day warranty. Parts will be provided by L&D Appliance along with your local tech support for repairs.
Returns
Buyer has 15-days to return an item if they are not satisfied or purchased accidentally, the buyer is responsible for crating and shipping the equipment back to our warehouse in SC. Once the equipment has been inspected, L&D Appliance will process a refund less any damage, missing component cost, initial shipping cost (actual cost of original shipment even on free shipping promotion) and a 15% restock fee.
Delivery Inspection Required
Insure to inspect delivery for any significant damage caused by the freight carriers. If any major damage, please contact Alan 828-527-2241 before driver leaves. If severe damage, refuse delivery. If slight damage, insure driver notes damage before leaving. The is critical, because without documentation the freight company will not accept a claim for the damage and the item delivered will now be the responsibility of the recipient for repairs.
