Traulsen AHF132WP-FHS Pass Thru Warmer Qty 2

Original price was: $14,238.00.Current price is: $2,950.00.

2 in stock


4704 Traulsen AHF132WP-FHS pass thru warming cabinet4704 Traulsen AHF132WP-FHS warming cabinet pass through (2)4704 Traulsen AHF132WP-FHS warming cabinet pass through (5) 4704 Traulsen AHF132WP-FHS warming cabinet pass through (6) 4704 Traulsen AHF132WP-FHS warming cabinet pass through (7) 4704 Traulsen AHF132WP-FHS warming cabinet pass through (8) 4704 Traulsen AHF132WP-FHS warming cabinet pass through (1)  4704 Traulsen AHF132WP-FHS warming cabinet pass through (3) 4704 Traulsen AHF132WP-FHS warming cabinet pass through (4)



Model: AHF132WP-FHS

Traulsen Pass Thru Holding Cabinet

New scratch and dent, Aged inventory from warehouse, No damage

Traulsen Pass Thru AHF132WP-FHS Product Details

  • Traulsen’s Smart Control With LED Display
  • A-Series: Stainless Steel Exterior/Anodized Aluminum Interior
  • Ducted Fan Air Distribution System
  • Standard Operating Temperature Range 140 to 180°F
  • One-Time Start-Up Temperature Adjustment Feature
  • ON/OFF Switch Located On Control Face
  • Full or Half Length Stainless Steel Doors With Locks
  • Self-Closing Doors With Stay Open Feature At 120°
  • Standard Door Hinging F & R: 132W = Right
  • Automatically Activated Incandescent Lights
  • Stainless Steel Breaker Caps
  • Three Adjustable Wire Shelves Per Section,
  • Magnetic Snap-In EZ-Clean Door Gasket(s)
  • Gasket-Protecting Metal Door Liner
  • Stainless Steel One-Piece Louver Assembly – Front & Rear
  • 9′ Cord & Plug Attached (one section models only)
  • Set of Four (4) 6″ High Adjustable Stainless Steel Legs

Dimensions & Utilities

Overall Dimensions:
Width: 29 7/8″
Depth: 37 15/16″
Height: 83 1/4″

Interior Dimensions:
Width: 24 7/8″
Depth: 27″
Height: 57 5/8″
Capacity: 26.1 cu. ft.

Power Type: 208V-230V Single Phase with neutral

Other On-line Dealers Pricing: $14,238.00

Free Shipping with lift gate service to continental united states businesses  – Please be aware the product will ship by freight carrier in a full size tractor trailer and will need room to get in and out or to turn around.

Traulsen AHF132WP-FHS Information

Thanks to its high performance ducted fan air distribution system, this Traulsen Specification Line AHF132WP-FHS 26.1 cu. ft. single section reach-in pass-through heated holding cabinet delivers even heat distribution, quicker daily start-up, lower energy use, and reduced lifetime service costs when compared to a standard model. The pass-through design allows it to be conveniently placed between your kitchen and serving or prep area so your staff can load prepared items from the back and your servers can access them from the front.

The Traulsen AHF132WP-FHS’s stainless steel front, sides, and doors combine with high-density foamed-in-place polyurethane insulation to ensure that this heated holding cabinet always delivers consistent temperatures between 135 and 180 degrees Fahrenheit. To monitor the interior cabinet temperature, a Fahrenheit/Celsius temperature display is located on the front of the unit.

Additionally, innovative INTELA-TRAUL microprocessor controls make operation easy with a 3-digit LED display, an on/off button, a one-time start-up temperature adjustment feature, and an RS485 data port all in one convenient location on the front of the unit. For maximum food safety, an alarm alerts your staff of high/low cabinet temperatures, as well as when the door is left open, and when there is a power supply interruption.

For superior versatility, this unit comes complete with three adjustable wire shelves to help you make the most of the heated holding cabinet’s spacious aluminum interior.

Packaging Equipment

L&D Appliance will package the items you purchase for free.  This will be strapping the item to a wooden pallet, installing cardboard or cardboard corners and shrink wrapping the product.

Warranty of Products

All Vulcan and Wolf equipment are purchased as-is-where-is and do not carry the factory warranty.  L&D Appliance does offer a 10-day warranty after the product has been installed.  The installation needs to be by a professional that can set-up and install the equipment properly.  Installation receipt and date will need to be provided for installed equipment for L&D Appliance to honor the 10-day warranty.  Parts will be provided by L&D Appliance along with your local tech support for repairs.


Buyer has 15-days to return an item if they are not satisfied or purchased accidentally, the buyer is responsible for crating and shipping the equipment back to our warehouse in SC.  Once the equipment has been inspected, L&D Appliance will process a refund less any damage, missing component cost, initial shipping cost (actual cost of original shipment even on free shipping promotion) and a 15% restock fee.

Delivery Inspection Required

Insure to inspect delivery for any significant damage caused by the freight carriers. If any major damage, please contact Alan 828-527-2241 before driver leaves. If severe damage, refuse delivery. If slight damage, insure driver notes damage before leaving. The is critical, because without documentation the freight company will not accept a claim for the damage and the item delivered will now be the responsibility of the recipient for repairs.