4929 Vulcan VE110HT 110 Refrigerated Chef Base


1 in stock


4929 Vulcan 110 inch refrigerated chef base (2)4929 Vulcan 110 inch refrigerated chef base (4)4929 Vulcan 110 inch refrigerated chef base (5)4929 Vulcan 110 inch refrigerated chef base (3)4929 Vulcan 110 inch refrigerated chef base (6)4929 Vulcan VE110HT refrigerated chef base 4929 Vulcan 110 inch refrigerated chef base (1) 4929 Vulcan 110 inch refrigerated chef base (10) 4929 Vulcan 110 inch refrigerated chef base (9)


Model: VE110HT / ARS110

Vulcan 110 Inch Refrigerated Chef Base

Used in the Vulcan Lab for testing equipment, tested perfectly

Vulcan VE110HT Refrigerated Chef Base Product Details

  • Stainless steel top, front, sides and interior
  • Marine edge top
  • Compressor on left
  • 4″ casters in adjustable channels
  • 6-drawer
  • 12x20x6 pan capacity 12
  • Max top load 1,500 lbs
  • INTELA-TRAUL microprocessor control system
  • Balanced, self-contained refrigeration system that utilizes R-450A
  • Front-breathing design allows for zero clearance installation
  • Controllable anti-condensate drawer perimeter heaters
  • Automatic non-electric condensate filter
  • Condenser filter
  • Off-cycle evaporator defrost
  • Magnetic snap-in drawer gaskets
  • Self-closing drawers with stay open feature
  • Side, front and rear access panels provide for ease of service and maintenance
  • 14-guage stainless steel drawer slides
  • 4,090 BTU/hr
  • 1/2 HP motor
  • NEMA 5-15 plug with 9′ cord and cord retainer

Dimensions & Utilities

  • 110 in. W x 32 in. D x 34 in. H 26
  • 12 A, 12 HP
  • 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug

Power Type: 120V

Other On-line Dealers Pricing: $24,854.00

Free Shipping with lift gate service to continental united states businesses  – Please be aware the product will ship by freight carrier in a full size tractor trailer and will need room to get in and out or to turn around.

VE110HT Vulcan Information

Make the most of your cooking line by adding this Vulcan VE110HT or ARS110 110″ self-contained refrigerated chef base to your kitchen! This base has four drawers and can hold up to a total of (8) 12″ x 20″ x 6″ pans of ingredients close at hand. By keeping ingredients nearby but still refrigerated, you can prevent additional trips back and forth to the refrigerator while still protecting your food from time and temperature abuse.

Each of the drawers has 14 gauge stainless steel drawer slides, a magnetic snap-in gasket, and a self-closing mechanism to ensure that the drawers close properly no matter how busy your staff is. And, for when you need to load or unload the drawers, they also have a stay open feature to hold them open while you work. Plus, to reduce interior condensation the drawers have controllable anti-condensate perimeter drawer heaters.

This unit features a stainless steel countertop with a marine edge that helps to contain drips and spills until they can be cleaned up, reducing the chance that your floors could become slippery. The top has a maximum weight capacity of 1500 lb. so you can place your countertop charbroiler, griddle, or other equipment safely on top.

The front, sides, and interior of the cabinet are also made of stainless steel for long-lasting durability and ease of cleaning. Inside, this chef base has 2″ thick high-density, foamed-in, non-CFC insulation to help maintain cold interior temperatures and add extra rigidity to the cabinet. A set of 4″ casters is included to make it easy to roll this unit away from the wall for easier servicing and cleaning. Plus, when you need to access the refrigeration system for service or maintenance the side, front, and rear access panels are easy to locate and remove.

The front-breathing design of the refrigeration system allows for zero-clearance installation against walls and between other equipment. The system uses a 1/3 hp compressor to circulate the R-450A refrigerant and the automatic non-electric condensate evaporator, off-cycle evaporator defrost, and condenser filter make this model easier to maintain. The interior temperature range of 34-38 degrees Fahrenheit is controlled by the INTELA-TRAUL controls. A 115V electrical connection is required for operation.

Packaging Equipment

L&D Appliance will package the items you purchase for free.  This will be strapping the item to a wooden pallet, installing cardboard or cardboard corners and shrink wrapping the product.

Warranty of Products

All Vulcan and Wolf equipment are purchased as-is-where-is and do not carry the factory warranty.  L&D Appliance does offer a 10-day warranty after the product has been installed.  The installation needs to be by a professional that can set-up and install the equipment properly.  Installation receipt and date will need to be provided for installed equipment for L&D Appliance to honor the 10-day warranty.  Parts will be provided by L&D Appliance along with your local tech support for repairs.


Buyer has 15-days to return an item if they are not satisfied or purchased accidentally, the buyer is responsible for crating and shipping the equipment back to our warehouse in SC.  Once the equipment has been inspected, L&D Appliance will process a refund less any damage, missing component cost, initial shipping cost (actual cost of original shipment even on free shipping promotion) and a 15% restock fee.

Delivery Inspection Required

Insure to inspect delivery for any significant damage caused by the freight carriers. If any major damage, please contact Alan 828-527-2241 before driver leaves. If severe damage, refuse delivery. If slight damage, insure driver notes damage before leaving. The is critical, because without documentation the freight company will not accept a claim for the damage and the item delivered will now be the responsibility of the recipient for repairs.