Description
Model: PWVER-1
Hobart High Temp Dishwasher
Used at shows for Demos, Cleaned and Tested Perfectly
Hobart PWVER-1 Dishwasher Product Details
- Part of the Advansys series
- Front-loading unit with single-piece, vertical-lift door
- Capacity: 12 full-size sheet pans or (1) 140-qt. mixing bowl
- 2-, 4-, and 6-minute NSF-rated wash cycles
- Washes 13 racks per hour with 2-minute wash cycle
- Washes 9 racks per hour with 4-minute wash cycle
- Washes 7 racks per hour with 6-minute wash cycle
- Uses 11⁄5 gal. of water per rack (24 gal. per hour)
- 21-gal. wash tank
- Sense-A-Temp booster heater raises 110-degree-F incoming water by 70 degrees F
- Steam elimination and energy recovery system
- Microcomputer controls with advanced digital cycle/temperature display
- 2 revolving, interchangeable, and anti-clogging upper and lower wash and rinse arms
- Advanced delime notification and cycle
- Advanced service diagnostics
- Includes 1 flat grid, 1 tray rack, and 1 flat bottom rack
- Spray hose
- Removable scrap screens and scrap basket
- Automatic fill
- Corrosion-resistant pump
- Automatic pumped drain
- Pumped rinse
- 16-ga. stainless steel construction
- Recommended incoming water temperature: 110 degrees F
- Required incoming water pressure: 15-65 PSI
- Water hardness should be 3 grains or less
Dimensions & Utilities
- 323⁄16 in. W x 373⁄16 in. D x 8811⁄16 in. H
- 47.6/53 A, 16.4 kW, 433⁄100 HP
- 208/240 V/60 Hz/3 ph
Power Type: 208V 3-phase power
Other On-line Dealers Pricing: $34,787.83
Free Shipping with lift gate service to continental united states businesses – Please be aware the product will ship by freight carrier in a full size tractor trailer and will need room to get in and out or to turn around.
Hobart PWVER-1 Dishwasher Information
The Hobart PWVER-1 Advansys™ pot, pan, and utensil washer uses a steam elimination and energy recovery system that captures heat from steam to warm incoming water, minimizing energy required when the Sense-A-Temp™ booster heater raises water temperatures to 180 degrees Fahrenheit while creating a steam-free working environment. To remove various levels of buildup, this unit features 2-, 4-, or 6-minute wash cycles. The 2-minute cycle cleans 13 racks per hour; the 4-minute cycle washes nine racks per hour; and the 6-minute wash cycle sanitizes seven racks per hour. Each cycle uses 11⁄5 gallons of water. For consistent results, this unit is equipped with two revolving, anti-clogging wash and rinse arms. Its automatic pumped drain and automatic fill minimizes hands-on tasks, while the advance delime notification alerts operators when the unit should be descaled.
The Hobart PWVER-1 dishmachine accepts 12 full-size sheet pans or a 140-quart mixing bowl at once. Its front-loading, vertical-lift door eases pan insertion and removal to create a streamlined work environment. Cookware can be placed on the included flat grid, tray rack, or flat bottom rack during wash and rinse cycles. So the unit is positioned at a comfortable working height, it measures 323⁄16 inches wide by 373⁄16 inches deep by 8811⁄16 inches tall overall. For lasting rust, corrosion, and wear resistance, this unit is made of 16-gauge stainless steel—a rugged metal that’s simple to maintain. To further ease cleaning, it’s outfitted with stainless steel scrap screens and a scrap basket.
Overall Dimensions:
- 323⁄16 in. W x 373⁄16 in. D x 8811⁄16 in. H
- 47.6/53 A, 16.4 kW, 433⁄100 HP
- 208/240 V/60 Hz/3 ph
Packaging Equipment
L&D Appliance will package the items you purchase for free. This will be strapping the item to a wooden pallet, installing cardboard or cardboard corners and shrink wrapping the product.
Warranty of Products
All Vulcan and Wolf equipment are purchased as-is-where-is and do not carry the factory warranty. L&D Appliance does offer a 10-day warranty after the product has been installed. The installation needs to be by a professional that can set-up and install the equipment properly. Installation receipt and date will need to be provided for installed equipment for L&D Appliance to honor the 10-day warranty. Parts will be provided by L&D Appliance along with your local tech support for repairs.
Returns
Buyer has 15-days to return an item if they are not satisfied or purchased accidentally, the buyer is responsible for crating and shipping the equipment back to our warehouse in SC. Once the equipment has been inspected, L&D Appliance will process a refund less any damage, missing component cost, initial shipping cost (actual cost of original shipment even on free shipping promotion) and a 15% restock fee.
Delivery Inspection Required
Insure to inspect delivery for any significant damage caused by the freight carriers. If any major damage, please contact Alan 828-527-2241 before driver leaves. If severe damage, refuse delivery. If slight damage, insure driver notes damage before leaving. The is critical, because without documentation the freight company will not accept a claim for the damage and the item delivered will now be the responsibility of the recipient for repairs.
