Sale!

5396 TBO60SL2 Prep Station

Original price was: $20,619.72.Current price is: $3,950.00.

Out of stock

Description

5396 traulsen TBO60SL2 prep station (1) 5396 traulsen TBO60SL2 prep station (2) 5396 traulsen TBO60SL2 prep station (3) 5396 traulsen TBO60SL2 prep station (4) 5396 traulsen TBO60SL2 prep station (5) 5396 traulsen TBO60SL2 prep station (6)

find-us-on-facebook-logoinstagram

Model: TBO60SL2

Traulsen 60″ Prep Table Refrigerator

Used for factory shows, tested to operating temp

Traulsen TBO60SL2 Product Details

  • Glycol System Exceeds NSF7 Requirements by Maintaining Food at or Below 39°F Using Specified 8″ Deep Pans
  • Stainless Steel Exterior & Interior
  • Reliable Microprocessor Control with LED Temperature Display
  • Heat Exchanger and Pump Closely Located from and in Communication with Refrigeration Controls
  • Horizontal Finned T6 Anodized Chiller Plates, Holds 1/3, 1/6, or 1/9 Size Pans Up to 8″ Deep (pans supplied by others)
  • General Fit 7.6″ Chiller Bar Spacing
  • Sloped Rail
  • 14″ White Poly Cutting Board (2 row pan rail models)
  • 8″ White Poly Cutting Board (3 row pan rail models)
  • 20″ Stainless Steel Door(s)
  • Standard Hinging: Left/Right (other hingings available)
  • Self-Closing Door(s) with Stay-Open Feature at 120 Degrees
  • Metal Door Handle(s) with Gasket Guard
  • Magnetic Snap-In Door Gasket(s)
  • Two (2) Powder Coated Shelves Per Door (factory installed)
  • Stainless Steel Lift-Off Night Cover
  • Thermostatic Expansion Valve Metering Device
  • 9′ Cord & Plug Attached
  • Set of Four (4) 6″ High Casters

Dimensions & Utilities

  • 10 A, 0.5 HP
  • 115 V/60 Hz/1 ph, 9-ft. cord with a NEMA 5-15P plug

Overall Dimensions:
Length: 60″
Depth: 32″
Height: 42″

Power Type: 120V

Other On-line Dealers Pricing: $20,619.72

Free Shipping with lift gate service to continental united states businesses  – Please be aware the product will ship by freight carrier in a full size tractor trailer and will need room to get in and out or to turn around.

TBO60SL2 Traulsen Prep Station Information

The Traulsen Specification Line TBO60SL2 60″ salad / pizza prep refrigerator with one door is the perfect way to prepare all of your signature dishes! A raised ingredient rail holds six 1/3 size food pans up to 6″ deep, and an ample 15″ work area lets you assemble pizzas, salads, sandwiches, and more! For superior temperature control, Traulsen’s TempAssure cooling system circulates cold air over all sides of the pans, preventing your products from freezing or drying out, and eliminating ice formation that can occur in traditional cold wall prep units.

Innovative INTELA-TRAUL microprocessor controls give you access to a 3-digit LED Fahrenheit/Celsius temperature display and an RS485 data port. For maximum food safety, an alarm alerts your staff of high/low temperatures and power supply interruptions.

A stainless steel insulated rail cover helps to keep your ingredients cool, and the refrigerated interior boasts two shelves for additional storage. Its 1/2 hp compressor uses environmentally friendly R-404A refrigerant to maintain food safe holding temperatures, and a 2″ layer of insulation contributes to outstanding temperature retention and efficiency.

Maintenance is now also easier and cost-effectve thanks to this unit’s bottom drain facilities and a spill-safe ingredient rail that can be rinsed with water and doesn’t need to be defrosted for cleaning. The Traulsen TS048HT one door 48″ salad / pizza prep refrigerator requires a 115V electrical connection.

Overall Dimensions:
Width: 60″
Depth: 36″
Work Surface Height: 35 9/16″
Height: 48 3/8″
Volume: 9.5 cu. ft.

Packaging Equipment

L&D Appliance will package the items you purchase for free.  This will be strapping the item to a wooden pallet, installing cardboard or cardboard corners and shrink wrapping the product.

Warranty of Products

All Vulcan and Wolf equipment are purchased as-is-where-is and do not carry the factory warranty.  L&D Appliance does offer a 10-day warranty after the product has been installed.  The installation needs to be by a professional that can set-up and install the equipment properly.  Installation receipt and date will need to be provided for installed equipment for L&D Appliance to honor the 10-day warranty.  Parts will be provided by L&D Appliance along with your local tech support for repairs.

Returns

Buyer has 15-days to return an item if they are not satisfied or purchased accidentally, the buyer is responsible for crating and shipping the equipment back to our warehouse in SC.  Once the equipment has been inspected, L&D Appliance will process a refund less any damage, missing component cost, initial shipping cost (actual cost of original shipment even on free shipping promotion) and a 15% restock fee.

Delivery Inspection Required

Insure to inspect delivery for any significant damage caused by the freight carriers. If any major damage, please contact Alan 828-527-2241 before driver leaves. If severe damage, refuse delivery. If slight damage, insure driver notes damage before leaving. The is critical, because without documentation the freight company will not accept a claim for the damage and the item delivered will now be the responsibility of the recipient for repairs.