Description

Model: RDT132WUT-HHS

Traulsen Split Door Refrigerator and Freezer with shelves

New scratch and dent, aged inventory

Traulsen Split Door Refrigerator and Freezer RDT132WUT-HHS Product Details

• Refigerator cabinet on top
• Freezer cabinet on bottom
• Traulsen’s Smart Control with LED Display
• StayClear™ Condenser
• R-Series: Stainless Steel Exterior & Interior
• Balanced, Self-Contained Refrigeration System Using R-450A
• Rear Biased Return Air Duct
• Half Length Stainless Steel Doors With Locks
• Self-Closing Doors With Stay Open Feature At 120°F
• Automatically Activated LED Lights
• Stainless Steel Breaker Caps
• Tray slides that are adjustable
• Automatic Non-Electric Condensate Evaporator
• Magnetic Snap-In EZ-Clean Door Gasket(s)
• Gasket-Protecting Metal Door Liner
• Thermostatic Expansion Valve Metering Device
• Stainless Steel One-Piece Louver Assembly
• 9′ Cord & Plug Attached
• Set of Four (4) 6″ High Adjustable Stainless Steel Legs

Self-contained Refrigeration System

• Temperature holding range: 34-38 degrees F
• Water-resistant microcompressor control system
• 3-digit LED display shows the temperature in Fahrenheit or Celsius
• Uses R-450A refrigerant
• Mounted on top, away from debris on the floor
• Evaporator coil outside the food zone maximizes usable storage space
• Accessible behind the 1-piece louver assembly
• Front-facing condenser coil is accessible for cleaning

Dimensions & Utilities

Overall Dimensions:
Width: 29 7/8″
Depth: 35″
Height: 83 1/4″

Interior Dimensions:
Depth: 27″
Capacity (total): 21.6 cu. ft.

Power Type: 120V

Other On-line Dealers Pricing: $23,310.00

Free Shipping with lift gate service to continental united states businesses  – Please be aware the product will ship by freight carrier in a full size tractor trailer and will need room to get in and out or to turn around.

Traulsen RDT132WUT-HHS Details

The Traulsen Specification Line RDT132WUT-HHS all stainless steel 21.6 cu. ft. single section reach in refrigerator / freezer lets you store refrigerated and frozen food in one convenient location! And as part of Traulsen’s Specification Line Series, you can be sure that this unit features superior durability and performance for your commercial kitchen.

This two-in-one unit comes with a 10.8 cu. ft. refrigerated section on top to keep fresh ingredients, dressings, sauces, and more chilled until ready for use. One adjustable wire shelf helps you make the most of the refrigerated section’s space.

Below the refrigerated compartment, a similarly sized freezer section lets you keep appetizers, sides, and entrees frozen, and it comes with another adjustable wire shelf. A 1/2 hp top mounted compressor circulates environmentally friendly R-450A refrigerant.

Innovative INTELA-TRAUL microprocessor controls for each section give you access to a 3-digit LED Fahrenheit/Celsius temperature display and an RS485 data port. For maximum food safety, an alarm alerts your staff of high/low temperatures, when the doors are left open, and when there is a power supply interruption.

This single section refrigerator / freezer comes with high-density foamed-in-place polyurethane insulation to help maintain consistent internal temperatures. For added convenience, its self-closing doors include a stay-open feature when opened past 120 degrees.

Overall Dimensions:
Width: 29 7/8″
Depth: 35″
Height: 83 1/4″

Interior Dimensions:
Depth: 27″
Capacity (total): 21.6 cu. ft.

Packaging Equipment

L&D Appliance will package the items you purchase for free.  This will be strapping the item to a wooden pallet, installing cardboard or cardboard corners and shrink wrapping the product.

Warranty of Products

All Vulcan and Wolf equipment are purchased as-is-where-is and do not carry the factory warranty.  L&D Appliance does offer a 10-day warranty after the product has been installed.  The installation needs to be by a professional that can set-up and install the equipment properly.  Installation receipt and date will need to be provided for installed equipment for L&D Appliance to honor the 10-day warranty.  Parts will be provided by L&D Appliance along with your local tech support for repairs.

Returns

Buyer has 15-days to return an item if they are not satisfied or purchased accidentally, the buyer is responsible for crating and shipping the equipment back to our warehouse in SC.  Once the equipment has been inspected, L&D Appliance will process a refund less any damage, missing component cost, initial shipping cost (actual cost of original shipment even on free shipping promotion) and a 15% restock fee.

Delivery Inspection Required

Insure to inspect delivery for any significant damage caused by the freight carriers. If any major damage, please contact Alan 828-527-2241 before driver leaves. If severe damage, refuse delivery. If slight damage, insure driver notes damage before leaving. The is critical, because without documentation the freight company will not accept a claim for the damage and the item delivered will now be the responsibility of the recipient for repairs.