Description

Model: SG4

Vulcan Gas Convection Oven with Gentle Bake Cycle with tall legs

New –  Scratch and Dent – Tested Perfectly

Vulcan SG4 Gas Convection Oven Product Details

• Exterior is stainless steel for durability and strength
• Selector switch has a gentle bake option
• Interior is made of steel with porcelain enamel for strength and corrosion resistance
• 5 nickel-plated racks measure 28¹/₄ in. x 20¹/₂ in. and can be changed to 11 different positions
• Heat is kept inside the unit with insulation
• Doors are independently operated
• Double pane windows provide visibility into the cabinet
• Product can be seen with 2 interior lights
• Electric spark ignitor simplifies operation
• 50,000 BTU
• 120 V/60 Hz/1 ph, 7.7 A, ¹⁄₂ HP, 6-ft. cord with a NEMA 5-15P plug
• Interior dimensions: 29 in. W x 22¹/₈ in. D x 20. In. H
• Overall dimensions: 40¹/₄ in. W x 41¹/₈ in. D x 54³/₄ in. H

User-Friendly Control Panel

• Temperature range: 150-500 degrees F with the solid state temperature control
• Audible alarm for the 60-min. timer goes off when the cycle is completed
• Moisture vent damper control opens the vent to release moisture
• Amber light shows the unit is on
• White light alerts the operator that the burners are cycling on and off
• Red light turns on if the burners fail to ignite
• Fan speed is controlled with a hi/low switch

Gas Type: Propane gas and 120V power

Other On-line Dealers Pricing: $11,819.00

Free Shipping with lift gate service to continental united states businesses  – Please be aware the product will ship by freight carrier in a full size tractor trailer and will need room to get in and out or to turn around.

Vulcan SG4 Gas Range Information

Cooking even the most delicate product in your school kitchen or restaurant will be easier than ever with this SG4-NAT single deck full size gas convection oven. This natural gas unit offers a solid state thermostat with a 60 minute timer for simple, precise control of your cooking operations, and a wide temperature range from 150-500 degrees Fahrenheit to accommodate cooking a variety of different foods. For added versatility, a “gentle bake” mode can be activated that cycles the heat light on and off to allow for more gradual heating that helps keep delicate product like strudel and meringue pies from forming waves on the top.

Two lights illuminate the porcelain enamel interior, which is both attractive and easy to clean at the end of a busy day. Plus, five nickel plated Grab-n-Go racks fit into 11 different positions for ultimate interior customization. One 1/2 hp two speed fan motor recirculates heated air for fast, even cooking, and the unit features an “oven cool” switch, which is used for rapid cool down to increase efficiency and productivity at your establishment.

Two dual pane thermal glass windows encased by stainless steel door frames help reduce energy consumption and keep the outside glass from getting too hot. The doors are independently operated, so you can conserve energy by only opening one at a time to load and unload products. The stainless steel front, top, and sides ensure your unit is corrosion-resistant and built for long-lasting performance. 23 3/4″ painted legs come standard. A natural gas connection and a 120V electrical connection is required for operation.

Overall Dimensions:
Left to Right: 40 1/4″
Front to Back: 40 1/8″
Height: 54 3/4″

Interior Dimensions:
Left to Right: 29″
Front to Back: 22 1/8″
Height: 20″

Packaging Equipment

L&D Appliance will package the items you purchase for free.  This will be strapping the item to a wooden pallet, installing cardboard or cardboard corners and shrink wrapping the product.

Warranty of Products

All Vulcan and Wolf equipment are purchased as-is-where-is and do not carry the factory warranty.  L&D Appliance does offer a 10-day warranty after the product has been installed.  The installation needs to be by a professional that can set-up and install the equipment properly.  Installation receipt and date will need to be provided for installed equipment for L&D Appliance to honor the 10-day warranty.  Parts will be provided by L&D Appliance along with your local tech support for repairs.

Returns

Buyer has 15-days to return an item if they are not satisfied or purchased accidentally, the buyer is responsible for crating and shipping the equipment back to our warehouse in SC.  Once the equipment has been inspected, L&D Appliance will process a refund less any damage, missing component cost, initial shipping cost (actual cost of original shipment even on free shipping promotion) and a 15% restock fee.

Delivery Inspection Required

Insure to inspect delivery for any significant damage caused by the freight carriers. If any major damage, please contact Alan 828-527-2241 before driver leaves. If severe damage, refuse delivery. If slight damage, insure driver notes damage before leaving. The is critical, because without documentation the freight company will not accept a claim for the damage and the item delivered will now be the responsibility of the recipient for repairs.